Planer Nova S520 and S630
Planer for professional use. Sturdy steel stand. The planing table is mounted on four heavy duty support bolts, which enables perfect adjustment without a locking device. Heavy duty feed system with adjustable roller pressure and screw-shaped overhead feed roller plus sectioned pressure roller. 4 feed rates, electric lifting of the planing table and two rollers in the table. Simple adjustment of the planing bit.
Supplied as standard with 400 volt 3-phase motor - protection class IP 54, contactor with automatic circuit breaker and zero voltage protection, motor brake, 120 mm Ø dust hood and simple, easy-to-use front operating panel.
This is the same machinery as Formula SP1 and SP2 that the supplier chose to replace the cover on.
| ETIM class code |
EC004038
|
|---|---|
| No. of bevels |
3-phase
|
| Feed rate |
5 m/min,
8 m/min,
12 m/min,
18 m/min
|
| Cutter diameter |
120 mm
|
| Planing bits |
4 st
|
| Cutter speed |
4500 r/min
|
| Connection sleeve diameter |
150 mm
|
| Enclosure class IP |
IP54
|
Fetching article information
