Milling and drilling machine with motor-driven length feed Luna MMD 500
Combined milling and drilling machine. Suitable for repair, maintenance and training purposes as drilling and milling can be performed in the same setup. The drill spindle is equipped partly with rapid feeding, where the feed lever works directly against the gear rack on the spindle sleeve, and partly with a fine feed wheel. The tools are locked in place with a tie bar with an M12 thread. The drill head can be angled 90° in both directions. Dovetail ways provide good stability to the head and table.
Supplied complete with motorised length feed, cast tripod, central lubrication, 2-speed motor, motor protection with zero voltage release, complete coolant equipment and automatic reversing with position sensors.
Limit digital measuring equipment assembly, price on request.
| Manufacturer´s description |
MMD 500
|
|---|---|
| ETIM class code |
EC004302
|
| Motor voltage |
400 V 50 Hz
|
| No. of bevels |
3-phase
|
| Rated current |
3.8 A
|
| Spindle nose |
30 ISO
|
| Spindle movement |
120 mm
|
| Spindle speed |
50-2500 r/min
|
| Column diameter |
250 mm
|
| Distance spindle nose-table, max |
460 mm
|
| Distance spindle nose-table, min |
110 mm
|
| Coordinate table width |
240 mm
|
| Coordinate table length |
820 mm
|
| Lengthwise movement |
450 mm
|
| Height movement |
350 mm
|
| T-slot width, bench |
15 mm
|
| Cross movement |
350 mm
|
| T-slot c/c |
64 mm
|
| Milling capacity, end milling |
32 mm
|
| Drill capacity in steel |
32 mm
|
| Milling capacity, flat face milling |
102 mm
|
| Thread capacity |
16 M
|
| Distance spindle centre-column |
295 mm
|
| Weight |
650 kg
|
