End mill, multi-flute Gühring 3431
Description
3431 M42. Long. Multi-flute. Straight shank and flats. Boring (up to 25 mm) milling cutter for slab, groove and end face milling in materials that are moderate to difficultto process up to approximately 1200 N/mm². Flute design: 30° right spiral. Measurement according to DIN 844.
Complete assortment please see the Gühring original catalogue.
- Articles
- Compare Articles
- Similar Products
GTIN
| Item no. | Description | Pack | Contents |
|---|---|---|---|
| 65480105 | END MILL 3431 3,0 | ||
| GTIN: 4031093379076 | PCS | 1 | |
| 65480204 | END MILL 3431 4,0 | ||
| GTIN: 4031093379083 | PCS | 1 | |
| 65480303 | END MILL 3431 5,0 | ||
| GTIN: 4031093379090 | PCS | 1 | |
| 65480352 | END MILL 3431 6,0 | ||
| GTIN: 4031093379106 | PCS | 1 | |
| 65480402 | END MILL 3431- 7MM | ||
| GTIN: 4031093379113 | PCS | 1 | |
| 65480501 | END MILL 3431 8,0 | ||
| GTIN: 4031093379120 | PCS | 1 | |
| 65480550 | END MILL 3431 9,0 | ||
| GTIN: 4031093379137 | PCS | 1 | |
| 65480600 | END MILL 3431 10,0 | ||
| GTIN: 4031093379144 | PCS | 1 | |
| 65480634 | END MILL 3431-11MM | ||
| GTIN: 4031093379151 | PCS | 1 | |
| 65480659 | END MILL 3431 12,0 | ||
| GTIN: 4031093379168 | PCS | 1 | |
| 65480758 | END MILL 3431 14,0 | ||
| GTIN: 4031093379175 | PCS | 1 | |
| 65480907 | END MILL 3431-16MM | ||
| GTIN: 4031093379199 | PCS | 1 | |
| 65481004 | END MILL 3431 18,0 | ||
| GTIN: 4031093379205 | PCS | 1 | |
| 65481103 | END MILL 3431 20,0 | ||
| GTIN: 4031093379212 | PCS | 1 | |
| 65481301 | END MILL 3431 25,0 | ||
| GTIN: 4031093379229 | PCS | 1 | |
| 65481459 | END MILL 3431-30MM | ||
| GTIN: 4031093379236 | PCS | 1 | |